ASSEMBLY PROCEDURES
| Number | Reference | Image | Name | Price | |
|---|---|---|---|---|---|
| MANIFOLD BANK 1 6.2 FORD (CYL1 SIDE)MS | Ref#1646011 |  | MANIFOLD BANK 1 6.2 FORD (CYL1 SIDE)MS | USD $465.20 | |
| Indmar WASHER FLAT 42552 (7/16) SAE SP25 | Ref#1676420Q |  | Indmar WASHER FLAT 42552 (7/16) SAE SP25 | USD $0.16 | |
| Indmar SENSOR O2 WIDE RANGE 6.2 FORD - Air Fuel Sensor - This is the pre-cat sens that goes in the cast iron exh manifol | Ref#1608125 |  | Indmar SENSOR O2 WIDE RANGE 6.2 FORD - Air Fuel Sensor - This is the pre-cat sens that goes in the cast iron exh manifol | USD $142.00 | |
| Indmar PIN PULL 7/16-20X3 1/2 (SP25) | Ref#1676468Q |  | Indmar PIN PULL 7/16-20X3 1/2 (SP25) | USD $4.39 | |
| Indmar NUT MJ10 X 1.25 HEX FLANGED (FH TRILOCK) | Ref#1677105Q |  | Indmar NUT MJ10 X 1.25 HEX FLANGED (FH TRILOCK) | USD $1.04 | |
| Indmar NUT HEX 7/16-20 x 37259 SP25(SAE SP) | Ref#1676469Q |  | Indmar NUT HEX 7/16-20 x 37259 SP25(SAE SP) | USD $0.23 | |
| Indmar MANIFOLD BANK 2 STBD 6.2 FORD (CYL 5 SIDE)MS W.CAT | Ref#1646012 |  | Indmar MANIFOLD BANK 2 STBD 6.2 FORD (CYL 5 SIDE)MS W.CAT | USD $465.20 | |
| Indmar GASKET ARMORED EXHAUST ELBOW 6.2 - fits 360HP, 400HP, 440HP | Ref#1608159 |  | Indmar GASKET ARMORED EXHAUST ELBOW 6.2 - fits 360HP, 400HP, 440HP | USD $5.20 | |
| Indmar Exhaust Fitting Nylon Straight 3/4" NPT x 1" Barb (305 350 350-HP 454 454-HP) | Ref#1716119 |  | Indmar Exhaust Fitting Nylon Straight 3/4" NPT x 1" Barb (305 350 350-HP 454 454-HP) | USD $3.96 | |
| Indmar Exhaust Fitting Nylon Elbow 3/4" NPT x 1" Barb (305 350 350-HP 454 454-HP) | Ref#1716123 |  | Indmar Exhaust Fitting Nylon Elbow 3/4" NPT x 1" Barb (305 350 350-HP 454 454-HP) | USD $4.00 | |
| Indmar EXHAUST ELBOW 4Inch RUBBER | Ref#1956172 |  | Indmar EXHAUST ELBOW 4Inch RUBBER | USD $216.00 | |
| CLAMP 1 3/4 X 3/4 HOLE 3/8 CLIP EDGES | Ref#1846122MOD |  | CLAMP 1 3/4 X 3/4 HOLE 3/8 CLIP EDGES | USD $3.64 |